[][src]Struct sequoia_openpgp::packet::signature::subpacket::CLOCK_SKEW_TOLERANCE

pub struct CLOCK_SKEW_TOLERANCE { /* fields omitted */ }

The default amount of tolerance to use when comparing some timestamps.

Used by Subpacket::signature_alive.

When determining whether a timestamp generated on another machine is valid now, we need to account for clock skew. (Note: you don't normally need to consider clock skew when evaluating a signature's validity at some time in the past.)

We tolerate half an hour of skew based on the following anecdote: In 2019, a developer using Sequoia in a Windows VM running inside of Virtual Box on Mac OS X reported that he typically observed a few minutes of clock skew and occasionally saw over 20 minutes of clock skew.

Note: when new messages override older messages, and their signatures are evaluated at some arbitrary point in time, an application may not see a consistent state if it uses a tolerance. Consider an application that has two messages and wants to get the current message at time te:

  • t0: message 0
  • te: "get current message"
  • t1: message 1

If te is close to t1, then t1 may be considered valid, which is probably not what you want.

Methods from Deref<Target = Duration>

pub const SECOND: Duration[src]

pub const MILLISECOND: Duration[src]

pub const MICROSECOND: Duration[src]

pub const NANOSECOND: Duration[src]

pub const fn as_secs(&self) -> u641.3.0[src]

Returns the number of whole seconds contained by this Duration.

The returned value does not include the fractional (nanosecond) part of the duration, which can be obtained using subsec_nanos.

Examples

use std::time::Duration;

let duration = Duration::new(5, 730023852);
assert_eq!(duration.as_secs(), 5);

To determine the total number of seconds represented by the Duration, use as_secs in combination with subsec_nanos:

use std::time::Duration;

let duration = Duration::new(5, 730023852);

assert_eq!(5.730023852,
           duration.as_secs() as f64
           + duration.subsec_nanos() as f64 * 1e-9);

pub const fn subsec_millis(&self) -> u321.27.0[src]

Returns the fractional part of this Duration, in whole milliseconds.

This method does not return the length of the duration when represented by milliseconds. The returned number always represents a fractional portion of a second (i.e., it is less than one thousand).

Examples

use std::time::Duration;

let duration = Duration::from_millis(5432);
assert_eq!(duration.as_secs(), 5);
assert_eq!(duration.subsec_millis(), 432);

pub const fn subsec_micros(&self) -> u321.27.0[src]

Returns the fractional part of this Duration, in whole microseconds.

This method does not return the length of the duration when represented by microseconds. The returned number always represents a fractional portion of a second (i.e., it is less than one million).

Examples

use std::time::Duration;

let duration = Duration::from_micros(1_234_567);
assert_eq!(duration.as_secs(), 1);
assert_eq!(duration.subsec_micros(), 234_567);

pub const fn subsec_nanos(&self) -> u321.3.0[src]

Returns the fractional part of this Duration, in nanoseconds.

This method does not return the length of the duration when represented by nanoseconds. The returned number always represents a fractional portion of a second (i.e., it is less than one billion).

Examples

use std::time::Duration;

let duration = Duration::from_millis(5010);
assert_eq!(duration.as_secs(), 5);
assert_eq!(duration.subsec_nanos(), 10_000_000);

pub const fn as_millis(&self) -> u1281.33.0[src]

Returns the total number of whole milliseconds contained by this Duration.

Examples

use std::time::Duration;

let duration = Duration::new(5, 730023852);
assert_eq!(duration.as_millis(), 5730);

pub const fn as_micros(&self) -> u1281.33.0[src]

Returns the total number of whole microseconds contained by this Duration.

Examples

use std::time::Duration;

let duration = Duration::new(5, 730023852);
assert_eq!(duration.as_micros(), 5730023);

pub const fn as_nanos(&self) -> u1281.33.0[src]

Returns the total number of nanoseconds contained by this Duration.

Examples

use std::time::Duration;

let duration = Duration::new(5, 730023852);
assert_eq!(duration.as_nanos(), 5730023852);

pub fn as_secs_f64(&self) -> f641.38.0[src]

Returns the number of seconds contained by this Duration as f64.

The returned value does include the fractional (nanosecond) part of the duration.

Examples

use std::time::Duration;

let dur = Duration::new(2, 700_000_000);
assert_eq!(dur.as_secs_f64(), 2.7);

pub fn as_secs_f32(&self) -> f321.38.0[src]

Returns the number of seconds contained by this Duration as f32.

The returned value does include the fractional (nanosecond) part of the duration.

Examples

use std::time::Duration;

let dur = Duration::new(2, 700_000_000);
assert_eq!(dur.as_secs_f32(), 2.7);

Trait Implementations

impl Deref for CLOCK_SKEW_TOLERANCE[src]

type Target = Duration

The resulting type after dereferencing.

impl LazyStatic for CLOCK_SKEW_TOLERANCE[src]

Auto Trait Implementations

Blanket Implementations

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<T> Borrow<T> for T where
    T: ?Sized
[src]

impl<T> BorrowMut<T> for T where
    T: ?Sized
[src]

impl<T> From<T> for T[src]

impl<T, U> Into<U> for T where
    U: From<T>, 
[src]

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<V, T> VZip<V> for T where
    V: MultiLane<T>,